About this template
The Framing Punch Checklist is an essential quality assurance tool for general contractors, project managers, and site superintendents. Designed to streamline structural walkthroughs, this comprehensive form covers every phase of residential and commercial framing—from exterior elevations and basement foundations to second-floor layouts and roof trusses. Instead of juggling paper clipboards or messy notes, project teams can use this structured template to systematically verify structural integrity, code compliance, and trade work quality.
Built to capture critical inspection data right from the job site, the form tracks specific items like anchor bolts, fire blocking, rough openings, subfloor nailing, and truss bracing. If an item fails inspection, the form instantly prompts for corrective action or required punch details. By standardizing your framing inspections in a digital format, you reduce rework, keep subcontractors accountable, and ensure every build meets the highest standards before drywall installation begins.
Key features
- Systematically inspect every framing phase from foundation to roof trusses.
- Capture pass/fail status and specific punch list notes for every inspection item.
- Access directly from smartphones or tablets while walking the job site.
- Keep project managers, contractors, and builders aligned on outstanding work.
- Instantly store and organize inspection records in Google Sheets.
Use cases
- Pre-drywall structural inspections for new residential home builds.
- Commercial tenant improvement framing reviews.
- Subcontractor quality control audits before code enforcement visits.
- Internal punch list tracking for multi-unit housing projects.
What this form collects
- Customer Name (Short answer)Enter the name of the homeowner or client for this project.
- Job / Lot Number (Short answer)Enter the specific job, lot, or parcel identifier.
- Project Manager Performing Inspection (Short answer)Enter your full name.
- Project Manager Email Address (Short answer)Enter your professional email address for submission records.
- Check Saddles Extension Beyond Brick Walls (Multiple choice)Select the inspection status for this item.
- Punch Details (Saddles Extension) (Paragraph)Describe any corrective action needed if this item failed inspection.
- Check Brick & Siding Elevations Trim (Multiple choice)Select the inspection status for this item.
- Punch Details (Brick & Siding Trim) (Paragraph)Describe any corrective action needed if this item failed inspection.
- Check Tyvek Installation (Multiple choice)Select the inspection status for house wrap and weather barrier installation.
- Punch Details (Tyvek) (Paragraph)Describe any corrective action needed for house wrap installation.
- Check Sill Plate Straps/Anchor Bolts (Multiple choice)Select the inspection status for sill plate anchoring.
- Punch Details (Sill Plate Anchors) (Paragraph)Describe any corrective action needed for sill plate straps or anchor bolts.
- Check Bowed/Crowned Studs (Basement) (Multiple choice)Select the inspection status for basement wall stud straightness.
- Punch Details (Bowed/Crowned Studs - Basement) (Paragraph)Describe any corrective action needed for basement studs.
- Check Subfloor Nailing & Spacing (Multiple choice)Select the inspection status for subfloor fastening.
- Punch Details (Subfloor Nailing/Spacing) (Paragraph)Describe any corrective action needed for subfloor installation.
- Check Door & Window Rough Openings (Multiple choice)Select the inspection status for first floor rough openings.
- Punch Details (Rough Openings) (Paragraph)Describe any corrective action needed for rough openings.
- Check Plumb & Squared Walls (Second Floor) (Multiple choice)Select the inspection status for second floor wall alignment.
- Punch Details (Plumb & Squared Walls - Second Floor) (Paragraph)Describe any corrective action needed for second floor walls.
- Check Minimum 36" Stair Landing (Multiple choice)Select the inspection status for stair landing dimensions.
- Punch Details (36" Stair Landing) (Paragraph)Describe any corrective action needed for stair landings.
- Check Permanent Truss Bracing Installed (Multiple choice)Select the inspection status for permanent truss bracing.
- Punch Details (Truss Bracing) (Paragraph)Describe any corrective action needed for truss bracing.
- Check Safety Rail & Boots Installed (Multiple choice)Select the inspection status for job site safety rails and boots.
- Punch Details (Safety Rail & Boots) (Paragraph)Describe any corrective action needed for safety rails.
- Additional Punch Notes (Paragraph)Paste links to supplemental documents, engineer notes, or describe any other issues found during the inspection.
FAQ
What is a framing punch checklist?
A framing punch checklist is a structured document used by builders and project managers to inspect structural framing, identify deficiencies or 'punch' items, and ensure all work meets building codes and quality standards before insulation and drywall are installed.
Can I use this form on a mobile device at the job site?
Yes! Because this is powered by Google Forms, you can open and complete the checklist directly on your smartphone or tablet while walking through the framing phase.
How do I customize the checklist items for my specific project?
Once you copy the template to your Google Drive, you have full control to add, remove, or edit any questions or sections to match your specific building plans or regional code requirements.
Where is the inspection data stored?
All submissions are automatically saved in Google Forms and can be linked directly to a Google Sheets spreadsheet for easy sorting, filtering, and reporting.
Who should fill out this form?
This form is typically completed by project managers, quality control inspectors, site superintendents, or lead carpenters during their final framing walkthroughs.
Get this form in your Google Drive
Save a copy to your Google Drive with one click (uses 1 credit). Or build from a PDF or description in the app.